Your cart
Please Wait

Technical Information

Durabak™ floor coating and industrial coating is a tough, one-part polyurethane with self-contained recycled rubber granules, which give it an attractive tough-textured appearance. When exposed to atmospheric moisture, Durabak™ undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. Durabak™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and sound-proofing materials. It can be applied by roller, brush or spray. Durabak™ can give a relatively smooth or rough surface, depending on application technique.

Uses

Durabak™ has many applications for commercial, industrial, military and civilian use. Durabak™ protects surfaces from foul weather elements and harsh chemicals, while creating a non-slip surface on:

  • Pedestrian walkways
  • Truck beds
  • Pamps and loading docks
  • Bridges
  • Concrete, metal and wooden steps
  • Catwalks
  • Ship decks
  • Marine applications
  • pleasure boats
  • storage tanks
  • floors
  • ramps
  • pools and spas
  • sealing rusty pipes
  • playgrounds
  • freight elevators
  • tool handles
  • roofing
  • vehicle undercoating
  • curb ramps
  • parking lots

Physical Properties

Weight per gallon (lb) 10
Viscosity, Kreb units 67-72
Percent solids by weight 66%
Application temperature range 32°F-95°F
Application thickness, 2 coats dry 29-39 mils
Flexibility Total flexibility
Resilience Resilient in dry state
Abrasion resistance (Tabor wheel, 1000 g load, 1000 cycles) 30.5

Fire resistance

Flame spread

Smoke generation

ASTM E-162: 01

ASTM E-662: 06

Salt water resistance 100%
Freeze-thaw resistance -60°F to +254°F
Pot life 3 Hours
Shelf life (unopened) min 1 year
Flash time 1 – 3 hours
Walk time 6 to 12 hours
Time between coats 1 hour
Full circle 4 days
VOC 2.08 lbs/gal
DOT Hazmat Info coating, 3 UN1263, PG III
Solids 75.8%

Advantages

One-Part No mixing of components
Totally Flexible Never chips, flakes or peels
Repairable Bonds to itself
Protection Water resistant, resistant to acid, chemicals, UV exposure, salt water
Fast Drying Very short intercoat time; Foot traffic in 6 to 12 hours
Economical Lasts for years; no need to remove old Durabak™ when recoating
×