Durabak 18 Accelerator (UV Outdoor)

{"id":1630420271139,"title":"Xylene (Xylol) Quart","handle":"xylene-xylol-quart-klean-strip","description":"\u003cp\u003eXylene (Xylol) is used in nearly all Durabak applications, whether for wiping down the surface to be coated or for thinning the Durabak. Xylene is also very helpful for cleanup.\u003c\/p\u003e\n\u003cp\u003eSometimes you want to extend drying times to create a hard, protective and glossy finish. That’s when Klean-Strip® Xylene can be used in place of Toluene to thin specified oil-based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives, and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.\u003c\/p\u003e\n\u003cp\u003eUse only as specified by the coating, adhesive or hobby product manufacturer. Do not use as a general purpose cleaner. Xylene may soften or damage plastics, synthetics and many other finishes. Use only where specified, and test an inconspicuous area before application. Do not use on linoleum, plastic, rubber, asphalt tile, fiberglass or other synthetic materials. Xylene may harm these surfaces.\u003c\/p\u003e\n\u003cp\u003e***NOT FOR SALE IN THE STATE OF CALIFORNIA***\u003c\/p\u003e\n\u003cp\u003e***NOT FOR SALE IN THE STATE OF UTAH***\u003c\/p\u003e\n\u003cp\u003ePurchase \u003ca href=\"https:\/\/www.durabakcompany.com\/collections\/all\/products\/solvide-quart\"\u003eSOLVIDE \u003c\/a\u003ein CA and UT\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.durabakcompany.com\/wp-content\/uploads\/2018\/10\/KLN-QXY24-SDS-xylol-xylene-quart.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSDS SHEET\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFor residents of California\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor more information about this product you can see the manufacture’s information page \u003ca href=\"http:\/\/www.kleanstrip.com\/product\/xylene\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-03-31T16:22:49-04:00","created_at":"2019-03-20T22:24:55-04:00","vendor":"durabak-company","type":"","tags":["Durabak Automotive","Durabak Marine","Durabak Prep","SHOP NOW"],"price":1995,"price_min":1995,"price_max":1995,"available":true,"price_varies":false,"compare_at_price":2945,"compare_at_price_min":2945,"compare_at_price_max":2945,"compare_at_price_varies":false,"variants":[{"id":14282910466083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KSP-QXY24","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Xylene (Xylol) Quart","public_title":null,"options":["Default Title"],"price":1995,"weight":567,"compare_at_price":2945,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/files\/CotelXylene.png?v=1723123495"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/files\/CotelXylene.png?v=1723123495","options":["Title"],"media":[{"alt":null,"id":26030907326499,"position":1,"preview_image":{"aspect_ratio":0.432,"height":2194,"width":948,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/files\/CotelXylene.png?v=1723123495"},"aspect_ratio":0.432,"height":2194,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/files\/CotelXylene.png?v=1723123495","width":948}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eXylene (Xylol) is used in nearly all Durabak applications, whether for wiping down the surface to be coated or for thinning the Durabak. Xylene is also very helpful for cleanup.\u003c\/p\u003e\n\u003cp\u003eSometimes you want to extend drying times to create a hard, protective and glossy finish. That’s when Klean-Strip® Xylene can be used in place of Toluene to thin specified oil-based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives, and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.\u003c\/p\u003e\n\u003cp\u003eUse only as specified by the coating, adhesive or hobby product manufacturer. Do not use as a general purpose cleaner. Xylene may soften or damage plastics, synthetics and many other finishes. Use only where specified, and test an inconspicuous area before application. Do not use on linoleum, plastic, rubber, asphalt tile, fiberglass or other synthetic materials. Xylene may harm these surfaces.\u003c\/p\u003e\n\u003cp\u003e***NOT FOR SALE IN THE STATE OF CALIFORNIA***\u003c\/p\u003e\n\u003cp\u003e***NOT FOR SALE IN THE STATE OF UTAH***\u003c\/p\u003e\n\u003cp\u003ePurchase \u003ca href=\"https:\/\/www.durabakcompany.com\/collections\/all\/products\/solvide-quart\"\u003eSOLVIDE \u003c\/a\u003ein CA and UT\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.durabakcompany.com\/wp-content\/uploads\/2018\/10\/KLN-QXY24-SDS-xylol-xylene-quart.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSDS SHEET\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFor residents of California\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor more information about this product you can see the manufacture’s information page \u003ca href=\"http:\/\/www.kleanstrip.com\/product\/xylene\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":1630407262243,"title":"Etching Primer - Quart","handle":"etching-primer-quart","description":"\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, galvanized metal, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePRODUCT USES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer for DURABAK™ and DURABAK 18™\u003c\/li\u003e\n\u003cli\u003ePrimer for metal and fibreglass surfaces\u003c\/li\u003e\n\u003cli\u003eHeat resistant metal coating (up to 428°F)\u003c\/li\u003e\n\u003cli\u003eA postblast primer on steel work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eADVANTAGES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne part\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to metal\u003c\/li\u003e\n\u003cli\u003eQuick drying (30 minutes at 77°F)\u003c\/li\u003e\n\u003cli\u003eCan be topcoated with most paints after dry\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eGood resistance to acid, alkali and water\u003c\/li\u003e\n\u003cli\u003eNon flammable when cured\u003c\/li\u003e\n\u003cli\u003eShelf life 2+ years. Once opened, can be reclosed and will remain useable for a long period afterwards. If product begins to thicken, it can be thinned with lacquer thinner, MEK, Propanol, Acetone or other similar polar solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCOLOR\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIvory\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOVERAGE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 145 sq. ft.\/quart.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSURFACE PREPARATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll surfaces must be clean of dirt and release agents, dry, firm and free of rust and mill scale. All surfaces should be roughened. METCOTE will provide a fair bond to smooth surfaces, but roughening the surface will greatly improve adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eIron\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade the surface with 60 to 80 grit sand paper. If abrasive blasting is desired, the blast profile should not exceed 50 microns (or 2 mils).\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eAluminum\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade with 60 to 80 grit sandpaper, then rinse with solvent (listed above).\u003c\/p\u003e\n\u003cp\u003eNOTE: The finished surface on all substrates should have a scored, roughened profile for best adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir METCOTE™ well.\u003c\/li\u003e\n\u003cli\u003eApply thinly (less than 1.7 mils) by brush or roller\u003c\/li\u003e\n\u003cli\u003eFor conventional spray application, thin with lacquer thinners (approx 20%) to 16-20 secs (Ford Cup 4).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION TEMPERATURE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e23°F - 122°F\u003c\/p\u003e\n\u003cp\u003eNOTE: Lacquer thinners must not come into contact with DURABAK™ or DURABAK 18™ Allow METCOTE™ to dry completely before overcoating with either DURABAK™ or DURABAK 18™ 4 hours after METCOTE is applied.\u003c\/p\u003e","published_at":"2023-06-07T09:27:36-04:00","created_at":"2019-03-20T22:19:33-04:00","vendor":"durabak-company","type":"","tags":["Durabak Automotive","Durabak Marine","Durabak Prep","live","SHOP NOW"],"price":3995,"price_min":3995,"price_max":3995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14282885300259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"primer","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Etching Primer - Quart","public_title":null,"options":["Default Title"],"price":3995,"weight":1361,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","options":["Title"],"media":[{"alt":"Etching Primer - Quart - Durabak Company","id":1463139631139,"position":1,"preview_image":{"aspect_ratio":0.811,"height":1060,"width":860,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157"},"aspect_ratio":0.811,"height":1060,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","width":860},{"alt":"Etching Primer - Quart - Durabak Company","id":1168382492707,"position":2,"preview_image":{"aspect_ratio":0.7,"height":400,"width":280,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157"},"aspect_ratio":0.7,"height":400,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157","width":280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, galvanized metal, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePRODUCT USES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer for DURABAK™ and DURABAK 18™\u003c\/li\u003e\n\u003cli\u003ePrimer for metal and fibreglass surfaces\u003c\/li\u003e\n\u003cli\u003eHeat resistant metal coating (up to 428°F)\u003c\/li\u003e\n\u003cli\u003eA postblast primer on steel work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eADVANTAGES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne part\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to metal\u003c\/li\u003e\n\u003cli\u003eQuick drying (30 minutes at 77°F)\u003c\/li\u003e\n\u003cli\u003eCan be topcoated with most paints after dry\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eGood resistance to acid, alkali and water\u003c\/li\u003e\n\u003cli\u003eNon flammable when cured\u003c\/li\u003e\n\u003cli\u003eShelf life 2+ years. Once opened, can be reclosed and will remain useable for a long period afterwards. If product begins to thicken, it can be thinned with lacquer thinner, MEK, Propanol, Acetone or other similar polar solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCOLOR\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIvory\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOVERAGE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 145 sq. ft.\/quart.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSURFACE PREPARATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll surfaces must be clean of dirt and release agents, dry, firm and free of rust and mill scale. All surfaces should be roughened. METCOTE will provide a fair bond to smooth surfaces, but roughening the surface will greatly improve adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eIron\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade the surface with 60 to 80 grit sand paper. If abrasive blasting is desired, the blast profile should not exceed 50 microns (or 2 mils).\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eAluminum\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade with 60 to 80 grit sandpaper, then rinse with solvent (listed above).\u003c\/p\u003e\n\u003cp\u003eNOTE: The finished surface on all substrates should have a scored, roughened profile for best adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir METCOTE™ well.\u003c\/li\u003e\n\u003cli\u003eApply thinly (less than 1.7 mils) by brush or roller\u003c\/li\u003e\n\u003cli\u003eFor conventional spray application, thin with lacquer thinners (approx 20%) to 16-20 secs (Ford Cup 4).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION TEMPERATURE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e23°F - 122°F\u003c\/p\u003e\n\u003cp\u003eNOTE: Lacquer thinners must not come into contact with DURABAK™ or DURABAK 18™ Allow METCOTE™ to dry completely before overcoating with either DURABAK™ or DURABAK 18™ 4 hours after METCOTE is applied.\u003c\/p\u003e"}

{"id":1604860739619,"title":"Solvide - Quart","handle":"solvide-quart","description":"\u003cp\u003eSolvide is a new solvent that can be used to prep materials before Durabak applications instead of Xylene.\u003c\/p\u003e\n\u003cp\u003eSolvide can be used to thin Durabak for spraying.\u003c\/p\u003e\n\u003cp\u003eSolvide is VOC exempt.\u003c\/p\u003e\n\u003cp\u003eSolvide is legal to use in all 50 states.\u003c\/p\u003e\n\u003cheader class=\"entry-header\"\u003e\n\u003ch1 class=\"entry-title\"\u003eWhy Solvide\u003c\/h1\u003e\n\u003c\/header\u003e\n\u003cdiv class=\"entry-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndustrial Solvents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs a subset of industrial cleaning agents, hydrocarbon solvents are the most popular ones. They are petroleum-based solvents having hydrogen and carbons as the main elements of their chemical structure. There are two main categories of hydrocarbons solvents: Aliphatic solvents such as gasoline, kerosene and hexane that have straight hydrocarbons chains and are typically used for metal cleaning. Aromatic solvents, on the other hand, contain benzene ring structures and are widely used in the manufacturing of paint thinners, paint strippers, inks, etc. Examples in this category include toluene and xylenes.\u003c\/p\u003e\n\u003cp\u003eToluene has applications in paints, lacquers, thinners and glues manufacturing as a solvent and xylene (mixture of three xylene isomers and traces of other aromatic compounds) is the typical solvent that is employed for removing grease, waxes and oil as well as stripping and thinning for solvent based acrylic (SBA) sealers.\u003c\/p\u003e\n\u003cp\u003eDespite being the two most common industrial solvents, there are health hazard associated with the use of toluene- and xylene-based solvents. The main effect of inhaling toluene and xylene vapors are depression of the central nervous system, with symptoms such as headache, dizziness, nausea and vomiting. Effects may vary depending on the exposure dosage. Moreover, there are growing concerns upon industrial use of both toluene- and xylene-based solvents due to their VOC (Volatile Organic Compound) content. VOCs are normally used in solvents and thinners formulation to reduce viscosity.  As per EPA (Environmental Protection Agency), VOCs are defined as “any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates, and ammonium carbonate, which participates in atmospheric photo-chemical reactions.”\u003c\/p\u003e\n\u003cp\u003eAside from serious health problem associated with the VOCs, they participate in photo-chemical reactions (in the presence of nitrogen oxides and sunlight) and give rise to the formation of photochemical smog and ozone when released to the atmosphere. This made VOCs a major concern in several regions especially in the state of California, which has led to the push for replacements that do not contribute to smog.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image\"\u003e\u003cimg class=\"wp-image-34\" src=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710\" sizes=\"(max-width: 710px) 100vw, 710px\" srcset=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710 710w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=150 150w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=300 300w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=768 768w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=1024 1024w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg 1132w\" alt=\"\" data-attachment-id=\"34\" data-permalink=\"https:\/\/solvide.wordpress.com\/ozone-solvide\/\" data-orig-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710\" data-orig-size=\"1132,702\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"ozone-solvide\" data-image-description=\"\" data-medium-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710?w=300\" data-large-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710?w=710\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eSolvide, a Safe Alternative?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs an appropriate alternative, Solvide is a green organic solvent with the scientific name Parachlorobenzotrifluoride (\u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Molecular_formula\"\u003eformula\u003c\/a\u003e C7H4ClF3 and abbreviated as PCBTF). It is a colorless liquid with a distinct aromatic odor and considered to have negligible VOCs and therefore, it is exempt from the EPA’s stricter Clean Air Act Regulation. The reason is that in the troposphere, Solvide is transformed with an estimated half-life of 67 days by reaction with photochemically-produced hydroxyl radicals to give mainly 2-chloro-5-trifluoromethylphenol.4 which is not an environmental concern. Figure 1 shows the ozone forming potential of common solvents used in coating industry. As can be observed, Solvide (PCBTF) forms significantly lower amounts of ozone per pound emitted and thus can be regarded as a much safer alternative compared to toluene and xylenes.\u003c\/p\u003e\n\u003cp\u003eFig 1. Ozone Forming Potential of Common Coating Solvents\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolvide Properties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolvide is a colourless, stable, non-reactive, non-corrosive, hydrophobic, low polarity solvent that boils at 139°C and the vapour has a characteristic aromatic odour (Chemical structure shown in Fig 2). Its great advantage as a solvent is its capacity to dissolve large quantities of non- and low-polarity molecules. Only 20 g of Solvide is able to dissolve 22 g of printers’ ink. Also, the solvent has a low surface tension, allowing Solvide-based inks, paints and varnish solutions to easily penetrate cracks and crevices.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image\"\u003e\u003cimg class=\"wp-image-35\" src=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710\" sizes=\"(max-width: 608px) 100vw, 608px\" srcset=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png 608w, https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=150 150w, https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=300 300w\" alt=\"\" data-attachment-id=\"35\" data-permalink=\"https:\/\/solvide.wordpress.com\/chemical-structure-of-solvide\/\" data-orig-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710\" data-orig-size=\"608,442\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"chemical-structure-of-solvide\" data-image-description=\"\" data-medium-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710?w=300\" data-large-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710?w=608\"\u003e\u003c\/figure\u003e\n\u003cp\u003eFig 2. Chemical Structure of Solvide\u003c\/p\u003e\n\u003cp\u003eSolvide benefits compared to other high VOC content solvent makes it a great replacement to be used in a wide spectrum of applications including the manufacture of printing inks, cleaners, degreasing agents, aerosols, paints, adhesives, caulks, epoxies, and urethanes. Due to its exemption from the EPA’s Clean Air Act Regulation, it’s being sought as a viable option for coating companies as well. Table 1 compares physical properties of a number of industrial solvents including Solvide. As can be observed, Solvide has physical properties close to those of xylenes while posing low to no health risks. It also possesses a significantly lower vapor pressure relative to DCM or THF which makes it safer to work with.\u003c\/p\u003e\n\u003cp\u003eTable 1. Physical properties of typical industrial solvents\u003c\/p\u003e\n\u003ctable class=\"wp-block-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003eDCM\u003c\/td\u003e\n\u003ctd\u003eTHF\u003c\/td\u003e\n\u003ctd\u003eToluene\u003c\/td\u003e\n\u003ctd\u003eXylene\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSolvide\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eSurface Tension\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26.5\u003c\/td\u003e\n\u003ctd\u003e26.4\u003c\/td\u003e\n\u003ctd\u003e28.4\u003c\/td\u003e\n\u003ctd\u003e28.7\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eViscosity (cP)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.43\u003c\/td\u003e\n\u003ctd\u003e0.48\u003c\/td\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003ctd\u003e0.81\u003c\/td\u003e\n\u003ctd\u003e0.79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eFlash point\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e-17\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eVapor pressure @ at 25°C\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e430\u003c\/td\u003e\n\u003ctd\u003e162\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e8.3-8.8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eBoiling point (°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e139\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePCBTF has been adopted by the coatings industry due to its unique position among the growing list of deregulated materials as a reliable, medium boiler of good solvency for a very wide spectrum of coating resins.\u003c\/p\u003e\n\u003cp\u003eCheck the Safety Data Sheet for Solvide here\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/solvide.files.wordpress.com\/2019\/03\/pcbtf-5-9-17.pdf\"\u003ePCBTF 5-9-17\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2024-04-11T10:52:58-04:00","created_at":"2019-03-14T16:58:02-04:00","vendor":"durabak-company","type":"","tags":["Durabak Automotive","Durabak Marine","Durabak Prep","SHOP NOW"],"price":2195,"price_min":2195,"price_max":2195,"available":true,"price_varies":false,"compare_at_price":4995,"compare_at_price_min":4995,"compare_at_price_max":4995,"compare_at_price_varies":false,"variants":[{"id":14237104963619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Solvide","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solvide - Quart","public_title":null,"options":["Default Title"],"price":2195,"weight":907,"compare_at_price":4995,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/products\/Solvide_Quart_2x_7600efe0-c5e3-4c35-a33c-dd3f9fe51368.png?v=1579687175"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Solvide_Quart_2x_7600efe0-c5e3-4c35-a33c-dd3f9fe51368.png?v=1579687175","options":["Title"],"media":[{"alt":"Solvide - Quart - Durabak Company","id":1463210672163,"position":1,"preview_image":{"aspect_ratio":0.811,"height":1060,"width":860,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Solvide_Quart_2x_7600efe0-c5e3-4c35-a33c-dd3f9fe51368.png?v=1579687175"},"aspect_ratio":0.811,"height":1060,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Solvide_Quart_2x_7600efe0-c5e3-4c35-a33c-dd3f9fe51368.png?v=1579687175","width":860}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSolvide is a new solvent that can be used to prep materials before Durabak applications instead of Xylene.\u003c\/p\u003e\n\u003cp\u003eSolvide can be used to thin Durabak for spraying.\u003c\/p\u003e\n\u003cp\u003eSolvide is VOC exempt.\u003c\/p\u003e\n\u003cp\u003eSolvide is legal to use in all 50 states.\u003c\/p\u003e\n\u003cheader class=\"entry-header\"\u003e\n\u003ch1 class=\"entry-title\"\u003eWhy Solvide\u003c\/h1\u003e\n\u003c\/header\u003e\n\u003cdiv class=\"entry-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndustrial Solvents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs a subset of industrial cleaning agents, hydrocarbon solvents are the most popular ones. They are petroleum-based solvents having hydrogen and carbons as the main elements of their chemical structure. There are two main categories of hydrocarbons solvents: Aliphatic solvents such as gasoline, kerosene and hexane that have straight hydrocarbons chains and are typically used for metal cleaning. Aromatic solvents, on the other hand, contain benzene ring structures and are widely used in the manufacturing of paint thinners, paint strippers, inks, etc. Examples in this category include toluene and xylenes.\u003c\/p\u003e\n\u003cp\u003eToluene has applications in paints, lacquers, thinners and glues manufacturing as a solvent and xylene (mixture of three xylene isomers and traces of other aromatic compounds) is the typical solvent that is employed for removing grease, waxes and oil as well as stripping and thinning for solvent based acrylic (SBA) sealers.\u003c\/p\u003e\n\u003cp\u003eDespite being the two most common industrial solvents, there are health hazard associated with the use of toluene- and xylene-based solvents. The main effect of inhaling toluene and xylene vapors are depression of the central nervous system, with symptoms such as headache, dizziness, nausea and vomiting. Effects may vary depending on the exposure dosage. Moreover, there are growing concerns upon industrial use of both toluene- and xylene-based solvents due to their VOC (Volatile Organic Compound) content. VOCs are normally used in solvents and thinners formulation to reduce viscosity.  As per EPA (Environmental Protection Agency), VOCs are defined as “any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates, and ammonium carbonate, which participates in atmospheric photo-chemical reactions.”\u003c\/p\u003e\n\u003cp\u003eAside from serious health problem associated with the VOCs, they participate in photo-chemical reactions (in the presence of nitrogen oxides and sunlight) and give rise to the formation of photochemical smog and ozone when released to the atmosphere. This made VOCs a major concern in several regions especially in the state of California, which has led to the push for replacements that do not contribute to smog.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image\"\u003e\u003cimg class=\"wp-image-34\" src=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710\" sizes=\"(max-width: 710px) 100vw, 710px\" srcset=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710 710w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=150 150w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=300 300w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=768 768w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=1024 1024w, https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg 1132w\" alt=\"\" data-attachment-id=\"34\" data-permalink=\"https:\/\/solvide.wordpress.com\/ozone-solvide\/\" data-orig-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710\" data-orig-size=\"1132,702\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"ozone-solvide\" data-image-description=\"\" data-medium-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710?w=300\" data-large-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/ozone-solvide.jpg?w=710?w=710\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cstrong\u003eSolvide, a Safe Alternative?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs an appropriate alternative, Solvide is a green organic solvent with the scientific name Parachlorobenzotrifluoride (\u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Molecular_formula\"\u003eformula\u003c\/a\u003e C7H4ClF3 and abbreviated as PCBTF). It is a colorless liquid with a distinct aromatic odor and considered to have negligible VOCs and therefore, it is exempt from the EPA’s stricter Clean Air Act Regulation. The reason is that in the troposphere, Solvide is transformed with an estimated half-life of 67 days by reaction with photochemically-produced hydroxyl radicals to give mainly 2-chloro-5-trifluoromethylphenol.4 which is not an environmental concern. Figure 1 shows the ozone forming potential of common solvents used in coating industry. As can be observed, Solvide (PCBTF) forms significantly lower amounts of ozone per pound emitted and thus can be regarded as a much safer alternative compared to toluene and xylenes.\u003c\/p\u003e\n\u003cp\u003eFig 1. Ozone Forming Potential of Common Coating Solvents\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolvide Properties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolvide is a colourless, stable, non-reactive, non-corrosive, hydrophobic, low polarity solvent that boils at 139°C and the vapour has a characteristic aromatic odour (Chemical structure shown in Fig 2). Its great advantage as a solvent is its capacity to dissolve large quantities of non- and low-polarity molecules. Only 20 g of Solvide is able to dissolve 22 g of printers’ ink. Also, the solvent has a low surface tension, allowing Solvide-based inks, paints and varnish solutions to easily penetrate cracks and crevices.\u003c\/p\u003e\n\u003cfigure class=\"wp-block-image\"\u003e\u003cimg class=\"wp-image-35\" src=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710\" sizes=\"(max-width: 608px) 100vw, 608px\" srcset=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png 608w, https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=150 150w, https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=300 300w\" alt=\"\" data-attachment-id=\"35\" data-permalink=\"https:\/\/solvide.wordpress.com\/chemical-structure-of-solvide\/\" data-orig-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710\" data-orig-size=\"608,442\" data-comments-opened=\"0\" data-image-meta='{\"aperture\":\"0\",\"credit\":\"\",\"camera\":\"\",\"caption\":\"\",\"created_timestamp\":\"0\",\"copyright\":\"\",\"focal_length\":\"0\",\"iso\":\"0\",\"shutter_speed\":\"0\",\"title\":\"\",\"orientation\":\"0\"}' data-image-title=\"chemical-structure-of-solvide\" data-image-description=\"\" data-medium-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710?w=300\" data-large-file=\"https:\/\/solvide.files.wordpress.com\/2019\/01\/chemical-structure-of-solvide.png?w=710?w=608\"\u003e\u003c\/figure\u003e\n\u003cp\u003eFig 2. Chemical Structure of Solvide\u003c\/p\u003e\n\u003cp\u003eSolvide benefits compared to other high VOC content solvent makes it a great replacement to be used in a wide spectrum of applications including the manufacture of printing inks, cleaners, degreasing agents, aerosols, paints, adhesives, caulks, epoxies, and urethanes. Due to its exemption from the EPA’s Clean Air Act Regulation, it’s being sought as a viable option for coating companies as well. Table 1 compares physical properties of a number of industrial solvents including Solvide. As can be observed, Solvide has physical properties close to those of xylenes while posing low to no health risks. It also possesses a significantly lower vapor pressure relative to DCM or THF which makes it safer to work with.\u003c\/p\u003e\n\u003cp\u003eTable 1. Physical properties of typical industrial solvents\u003c\/p\u003e\n\u003ctable class=\"wp-block-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003eDCM\u003c\/td\u003e\n\u003ctd\u003eTHF\u003c\/td\u003e\n\u003ctd\u003eToluene\u003c\/td\u003e\n\u003ctd\u003eXylene\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSolvide\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eSurface Tension\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26.5\u003c\/td\u003e\n\u003ctd\u003e26.4\u003c\/td\u003e\n\u003ctd\u003e28.4\u003c\/td\u003e\n\u003ctd\u003e28.7\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eViscosity (cP)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.43\u003c\/td\u003e\n\u003ctd\u003e0.48\u003c\/td\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003ctd\u003e0.81\u003c\/td\u003e\n\u003ctd\u003e0.79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eFlash point\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e-17\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eVapor pressure @ at 25°C\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e430\u003c\/td\u003e\n\u003ctd\u003e162\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e8.3-8.8\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cem\u003eBoiling point (°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e139\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePCBTF has been adopted by the coatings industry due to its unique position among the growing list of deregulated materials as a reliable, medium boiler of good solvency for a very wide spectrum of coating resins.\u003c\/p\u003e\n\u003cp\u003eCheck the Safety Data Sheet for Solvide here\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/solvide.files.wordpress.com\/2019\/03\/pcbtf-5-9-17.pdf\"\u003ePCBTF 5-9-17\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}