Collection: Durabak Military

{"id":1630407262243,"title":"Etching Primer - Quart","handle":"etching-primer-quart","description":"\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, galvanized metal, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePRODUCT USES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer for DURABAK™ and DURABAK 18™\u003c\/li\u003e\n\u003cli\u003ePrimer for metal and fibreglass surfaces\u003c\/li\u003e\n\u003cli\u003eHeat resistant metal coating (up to 428°F)\u003c\/li\u003e\n\u003cli\u003eA postblast primer on steel work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eADVANTAGES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne part\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to metal\u003c\/li\u003e\n\u003cli\u003eQuick drying (30 minutes at 77°F)\u003c\/li\u003e\n\u003cli\u003eCan be topcoated with most paints after dry\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eGood resistance to acid, alkali and water\u003c\/li\u003e\n\u003cli\u003eNon flammable when cured\u003c\/li\u003e\n\u003cli\u003eShelf life 2+ years. Once opened, can be reclosed and will remain useable for a long period afterwards. If product begins to thicken, it can be thinned with lacquer thinner, MEK, Propanol, Acetone or other similar polar solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCOLOR\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIvory\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOVERAGE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 145 sq. ft.\/quart.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSURFACE PREPARATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll surfaces must be clean of dirt and release agents, dry, firm and free of rust and mill scale. All surfaces should be roughened. METCOTE will provide a fair bond to smooth surfaces, but roughening the surface will greatly improve adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eIron\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade the surface with 60 to 80 grit sand paper. If abrasive blasting is desired, the blast profile should not exceed 50 microns (or 2 mils).\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eAluminum\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade with 60 to 80 grit sandpaper, then rinse with solvent (listed above).\u003c\/p\u003e\n\u003cp\u003eNOTE: The finished surface on all substrates should have a scored, roughened profile for best adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir METCOTE™ well.\u003c\/li\u003e\n\u003cli\u003eApply thinly (less than 1.7 mils) by brush or roller\u003c\/li\u003e\n\u003cli\u003eFor conventional spray application, thin with lacquer thinners (approx 20%) to 16-20 secs (Ford Cup 4).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION TEMPERATURE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e23°F - 122°F\u003c\/p\u003e\n\u003cp\u003eNOTE: Lacquer thinners must not come into contact with DURABAK™ or DURABAK 18™ Allow METCOTE™ to dry completely before overcoating with either DURABAK™ or DURABAK 18™ 4 hours after METCOTE is applied.\u003c\/p\u003e","published_at":"2023-06-07T09:27:36-04:00","created_at":"2019-03-20T22:19:33-04:00","vendor":"durabak-company","type":"","tags":["Durabak Automotive","Durabak Marine","Durabak Prep","live","SHOP NOW"],"price":3995,"price_min":3995,"price_max":3995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14282885300259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"primer","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Etching Primer - Quart","public_title":null,"options":["Default Title"],"price":3995,"weight":1361,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","options":["Title"],"media":[{"alt":"Etching Primer - Quart - Durabak Company","id":1463139631139,"position":1,"preview_image":{"aspect_ratio":0.811,"height":1060,"width":860,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157"},"aspect_ratio":0.811,"height":1060,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Etching_Primer_Quart_2x_870b5439-8392-4c1b-bf19-44ac8063e923.png?v=1579687157","width":860},{"alt":"Etching Primer - Quart - Durabak Company","id":1168382492707,"position":2,"preview_image":{"aspect_ratio":0.7,"height":400,"width":280,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157"},"aspect_ratio":0.7,"height":400,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/NS5-primer.png?v=1579687157","width":280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, galvanized metal, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003eMETCOTE™ is a quick-drying single-pack anti corrosion heat-resistant etch primer polyvinyl butyral coating for non porous surfaces. It can be used on iron, steel, aluminum, fiberglass, concrete, and other porous surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePRODUCT USES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer for DURABAK™ and DURABAK 18™\u003c\/li\u003e\n\u003cli\u003ePrimer for metal and fibreglass surfaces\u003c\/li\u003e\n\u003cli\u003eHeat resistant metal coating (up to 428°F)\u003c\/li\u003e\n\u003cli\u003eA postblast primer on steel work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eADVANTAGES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne part\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to metal\u003c\/li\u003e\n\u003cli\u003eQuick drying (30 minutes at 77°F)\u003c\/li\u003e\n\u003cli\u003eCan be topcoated with most paints after dry\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eGood resistance to acid, alkali and water\u003c\/li\u003e\n\u003cli\u003eNon flammable when cured\u003c\/li\u003e\n\u003cli\u003eShelf life 2+ years. Once opened, can be reclosed and will remain useable for a long period afterwards. If product begins to thicken, it can be thinned with lacquer thinner, MEK, Propanol, Acetone or other similar polar solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCOLOR\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIvory\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOVERAGE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 145 sq. ft.\/quart.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSURFACE PREPARATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAll surfaces must be clean of dirt and release agents, dry, firm and free of rust and mill scale. All surfaces should be roughened. METCOTE will provide a fair bond to smooth surfaces, but roughening the surface will greatly improve adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eIron\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade the surface with 60 to 80 grit sand paper. If abrasive blasting is desired, the blast profile should not exceed 50 microns (or 2 mils).\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eAluminum\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eAbrade with 60 to 80 grit sandpaper, then rinse with solvent (listed above).\u003c\/p\u003e\n\u003cp\u003eNOTE: The finished surface on all substrates should have a scored, roughened profile for best adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir METCOTE™ well.\u003c\/li\u003e\n\u003cli\u003eApply thinly (less than 1.7 mils) by brush or roller\u003c\/li\u003e\n\u003cli\u003eFor conventional spray application, thin with lacquer thinners (approx 20%) to 16-20 secs (Ford Cup 4).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAPPLICATION TEMPERATURE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e23°F - 122°F\u003c\/p\u003e\n\u003cp\u003eNOTE: Lacquer thinners must not come into contact with DURABAK™ or DURABAK 18™ Allow METCOTE™ to dry completely before overcoating with either DURABAK™ or DURABAK 18™ 4 hours after METCOTE is applied.\u003c\/p\u003e"}

{"id":4825618219043,"title":"DuraPrime EP90","handle":"durapoxy-ep90","description":"\u003cp\u003eCovers approx. 70 sq.ft\u003cbr\u003e2 part epoxy\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART A\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCOTE-L MEGAPRIME EP-90 UNIVERSAL CLEAR EPOXY PRIMER\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECIALLY FORMULATED FOR DURABAK\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e AND OTHER POLYURETHANE, EPOXY, ACRYLIC, POLYESTER  \u0026amp; MOST WATER-BASED \u0026amp; SOLVENT-BASED TOPCOATS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Excellent adhesion and flexibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Fast drying time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e For interior and exterior use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrevents rust \u0026amp; corrosion\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Universal Epoxy Primer is an easy-to-use, low viscosity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eprimer suitable for all polyurethane, epoxy, acrylic, polyester,  water-based \u0026amp; solvent-based topcoats. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIt cures to provide exceptional adhesion to a variety of substrates, with the additional flexibility required for urethane. It provides a cost-effective coverage rate and a fast drying time even at low\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003etemperatures. MEGAPRIME EP-90 is ideal for concrete, plaster,\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003emost metals (see surface prep), wood, stone and existing coatings. MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ehas minimal solvent content and low odor suitable for interior \u0026amp; exterior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 inhibits metal corrosion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSURFACE PREPARATION\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnsure all substrates are thoroughly dry, clean, sound and free from any\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003econtaminants such as dirt, rust, salt, algae and grease. MEGAPRIME EP-90 exhibits good adhesion to all porous substrates and most non-porous substrates with the exception of certain types of aluminum (see surface prep for aluminum) and\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003estainless steel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Steel: Abrade surface lightly and remove any surface rust or mill scale by\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esanding, wire brushing, with a chipping hammer or sandblasting. A rust\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003econvertor may be necessary for rust that can’t all be removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Galvanized Steel: Clean away grease and dirt with a suitable galvanized\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSteel cleaner until a water break-free surface (water does not bead up on surface) is attained. Lightly abrade the surface. Rinse well with water and allow to dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Aluminum: Abrade to fresh metal, clean well using detergent. Apply within\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 hours before oxides can reform. A test area is recommended with certain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003egrades of aluminum, especially aircraft \u0026amp; marine grades, which may be difficult to\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebond to.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Concrete \u0026amp; other porous surfaces: Allow new concrete at least 28 days to cure (moisture content should be below 10%). Non-porous concrete must be acid-etched with muriatic acid (straight or diluted), washed with 5% ammonia solution, rinsed well and dried.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Wood: Abrade with 450-600 grit sandpaper, clean and allow to completely dry before application.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Fiberglass: Abrade well, solvent wipe with xylene (or any other solvent) and apply MEGAPRIME EP-90\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e PVC: Abrade with 600-800 grit sandpaper and clean well using xylene (or any other solvent). Allow to dry before application.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e Glazed tiles: MEGAPRIME EP-90 is \u003c\/span\u003e\u003cb\u003enot \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003esuitable for glazed tile.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Gloss Paints and Varnish: Abrade with a scouring pad or medium grit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esandpaper to remove all gloss. Solvent wipe with xylene (or any other solvent), allow to dry before\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eapplication.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Ferrous metals: Remove heavy dirt and rust. Use a rust convertor for rust\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ethat cannot be removed. Sand lightly, clean thoroughly before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Stone: Clean thoroughly with soapy water. Brush with a wire brush. Solvent\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ewipe and apply once dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAPPLICATION\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply at temperatures between 41°F-95°F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Take care when opening as contents may be under pressure.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Wear safety goggles and protective gloves.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e After substrates have been prepared, ensure they are completely dry,\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003etests for adhesion have been completed and areas not to be coated have\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebeen masked off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART A\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Stir part A with a mixing stick for at least 2 minutes until homogeneous before use, using a flat paddle. Add part B to part A and stir again for at least 2 minutes. (part B needs no stirring).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply at a rate of 41-76 sf\/qt., or a wet film thickness (WFT) of 5-6.5 mils.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply with a short nap roller, brush or spray gun (enamel spray gun or HVLP spray gun. (Air pressure 4 bar. Nozzle size 1.4mm).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Curing time:\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(i) At 68°F: the coating will be suitable for over coating, after touch-dry, in 4-24 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(ii) At 43°F: the coating will be suitable for over coating in 8 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhen over coating, make sure there is no water on the surface of the EP-90.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf left for more than 24 hours, without over coating, lightly sand \u0026amp; remove dust. Then recoat.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCOVERAGE\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e 60-81 sf per quart per coat. Applied in a single coat application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e(One quart can cover the square footage for one gal. of Durabak).\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Coverage will vary depending on the porosity and profile of the surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eREMOVING MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Uncured MEGAPRIME EP-90 can be cleaned using any solvent.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Cured MEGAPRIME EP-90: Can be removed with MEK\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(Methyl Ethyl Ketone), paint stripper or by mechanical means.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Remove any spills immediately as MEGAPRIME EP90 is very\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003edifficult to remove once cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCLEANING MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e Use hot soapy water or any solvent to clean the surface of the cured MEGAPRIME EP-90.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e(NOTE: Do not let the solvent sit on the surface of the cured MEGAPRIME EP-90 for more than a few minutes)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIMPORTANT\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Please read all instructions carefully before starting the project.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Proper surface preparation is critical for successful application of MEGAPRIME EP-90.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Take care when lifting and carrying. In transit, keep tightly closed in a\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esecure upright position.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Do not dilute with water or solvents.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Do not apply outdoors if rain is anticipated within the expected curing time. Apply when ambient and surface temperatures are 41°F to 95°F.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ePot life is 60 minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Shelf life approx. 3+ years\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Keep cool and protect against freezing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Observe local disposal regulations.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCAUTION: When part B is mixed with part A, the mixed primer increasingly heats up. This is normal\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSAFETY PRECAUTIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eContains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFLUIDAR (Aromatic 100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCAS number: 64742-75-6; 64742-88-7 \u0026amp; 71-43-2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFlammable liquid and vapour. Causes skin irritation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eKeep away from heat\/sparks\/open flames\/hot surfaces – No\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esmoking. Wear protective gloves\/protective clothing\/eye\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eprotection\/face protection. In case of inadequate ventilation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ewear respiratory protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIF ON SKIN: Wash with plenty of soap and water. IF IN EYES:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRinse with water for several minutes. Remove contact lenses, continue rinsing for several more minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStore in a well-ventilated area. Keep container tightly closed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDispose of contents according to local regulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eVOC: ≤ 80 g\/l\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART B\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMEGAPRIME EP-90 EPOXY CURATIVE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Epoxy Curative (Part B) must only be used with \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Universal Epoxy Primer (Part A).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no need to stir Part B.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe entire contents of Part B must be added to Part A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStir Part A \u0026amp; Part B together well with a flat paddle for at least 2 minutes or more, until the\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003emixture is completely homogenous.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor detailed Application instructions, please refer to Part A.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSAFETY PRECAUTIONS\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWarning \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHarmful if swallowed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCauses severe skin burns and eye damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMay cause an allergic skin reaction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuspected of causing genetic defects.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-07-29T08:42:42-04:00","created_at":"2020-11-12T15:12:17-05:00","vendor":"durabak-company","type":"","tags":["Durabak Automotive","Durabak Marine","Durabak Military","Durabak Prep","live","SHOP NOW"],"price":3995,"price_min":3995,"price_max":3995,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32950151675939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EP90","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"DuraPrime EP90","public_title":null,"options":["Default Title"],"price":3995,"weight":2268,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/products\/ep90-universal-epoxy-primer.jpg?v=1645649930","\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.53-removebg-preview.png?v=1645649930","\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.31-removebg-preview_1.png?v=1645649930","\/\/www.durabakcompany.com\/cdn\/shop\/products\/EP90zoomedin.jpg?v=1645649930"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/ep90-universal-epoxy-primer.jpg?v=1645649930","options":["Title"],"media":[{"alt":null,"id":21989042290723,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/ep90-universal-epoxy-primer.jpg?v=1645649930"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/ep90-universal-epoxy-primer.jpg?v=1645649930","width":800},{"alt":null,"id":20843092901923,"position":2,"preview_image":{"aspect_ratio":1.781,"height":374,"width":666,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.53-removebg-preview.png?v=1645649930"},"aspect_ratio":1.781,"height":374,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.53-removebg-preview.png?v=1645649930","width":666},{"alt":null,"id":20843090968611,"position":3,"preview_image":{"aspect_ratio":1.781,"height":374,"width":666,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.31-removebg-preview_1.png?v=1645649930"},"aspect_ratio":1.781,"height":374,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/WhatsApp_Image_2021-07-29_at_16.19.31-removebg-preview_1.png?v=1645649930","width":666},{"alt":null,"id":21491293585443,"position":4,"preview_image":{"aspect_ratio":0.805,"height":261,"width":210,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/EP90zoomedin.jpg?v=1645649930"},"aspect_ratio":0.805,"height":261,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/EP90zoomedin.jpg?v=1645649930","width":210}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCovers approx. 70 sq.ft\u003cbr\u003e2 part epoxy\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART A\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCOTE-L MEGAPRIME EP-90 UNIVERSAL CLEAR EPOXY PRIMER\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECIALLY FORMULATED FOR DURABAK\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e AND OTHER POLYURETHANE, EPOXY, ACRYLIC, POLYESTER  \u0026amp; MOST WATER-BASED \u0026amp; SOLVENT-BASED TOPCOATS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Excellent adhesion and flexibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Fast drying time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e For interior and exterior use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ePrevents rust \u0026amp; corrosion\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Universal Epoxy Primer is an easy-to-use, low viscosity\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eprimer suitable for all polyurethane, epoxy, acrylic, polyester,  water-based \u0026amp; solvent-based topcoats. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIt cures to provide exceptional adhesion to a variety of substrates, with the additional flexibility required for urethane. It provides a cost-effective coverage rate and a fast drying time even at low\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003etemperatures. MEGAPRIME EP-90 is ideal for concrete, plaster,\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003emost metals (see surface prep), wood, stone and existing coatings. MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ehas minimal solvent content and low odor suitable for interior \u0026amp; exterior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 inhibits metal corrosion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSURFACE PREPARATION\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEnsure all substrates are thoroughly dry, clean, sound and free from any\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003econtaminants such as dirt, rust, salt, algae and grease. MEGAPRIME EP-90 exhibits good adhesion to all porous substrates and most non-porous substrates with the exception of certain types of aluminum (see surface prep for aluminum) and\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003estainless steel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Steel: Abrade surface lightly and remove any surface rust or mill scale by\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esanding, wire brushing, with a chipping hammer or sandblasting. A rust\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003econvertor may be necessary for rust that can’t all be removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Galvanized Steel: Clean away grease and dirt with a suitable galvanized\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSteel cleaner until a water break-free surface (water does not bead up on surface) is attained. Lightly abrade the surface. Rinse well with water and allow to dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Aluminum: Abrade to fresh metal, clean well using detergent. Apply within\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 hours before oxides can reform. A test area is recommended with certain\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003egrades of aluminum, especially aircraft \u0026amp; marine grades, which may be difficult to\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebond to.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Concrete \u0026amp; other porous surfaces: Allow new concrete at least 28 days to cure (moisture content should be below 10%). Non-porous concrete must be acid-etched with muriatic acid (straight or diluted), washed with 5% ammonia solution, rinsed well and dried.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Wood: Abrade with 450-600 grit sandpaper, clean and allow to completely dry before application.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Fiberglass: Abrade well, solvent wipe with xylene (or any other solvent) and apply MEGAPRIME EP-90\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e PVC: Abrade with 600-800 grit sandpaper and clean well using xylene (or any other solvent). Allow to dry before application.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e Glazed tiles: MEGAPRIME EP-90 is \u003c\/span\u003e\u003cb\u003enot \u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003esuitable for glazed tile.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Gloss Paints and Varnish: Abrade with a scouring pad or medium grit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esandpaper to remove all gloss. Solvent wipe with xylene (or any other solvent), allow to dry before\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eapplication.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Ferrous metals: Remove heavy dirt and rust. Use a rust convertor for rust\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ethat cannot be removed. Sand lightly, clean thoroughly before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Stone: Clean thoroughly with soapy water. Brush with a wire brush. Solvent\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ewipe and apply once dry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAPPLICATION\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply at temperatures between 41°F-95°F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Take care when opening as contents may be under pressure.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Wear safety goggles and protective gloves.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e After substrates have been prepared, ensure they are completely dry,\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003etests for adhesion have been completed and areas not to be coated have\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ebeen masked off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART A\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Stir part A with a mixing stick for at least 2 minutes until homogeneous before use, using a flat paddle. Add part B to part A and stir again for at least 2 minutes. (part B needs no stirring).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply at a rate of 41-76 sf\/qt., or a wet film thickness (WFT) of 5-6.5 mils.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Apply with a short nap roller, brush or spray gun (enamel spray gun or HVLP spray gun. (Air pressure 4 bar. Nozzle size 1.4mm).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Curing time:\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(i) At 68°F: the coating will be suitable for over coating, after touch-dry, in 4-24 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(ii) At 43°F: the coating will be suitable for over coating in 8 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIMPORTANT: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhen over coating, make sure there is no water on the surface of the EP-90.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf left for more than 24 hours, without over coating, lightly sand \u0026amp; remove dust. Then recoat.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCOVERAGE\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e 60-81 sf per quart per coat. Applied in a single coat application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e(One quart can cover the square footage for one gal. of Durabak).\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Coverage will vary depending on the porosity and profile of the surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eREMOVING MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Uncured MEGAPRIME EP-90 can be cleaned using any solvent.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Cured MEGAPRIME EP-90: Can be removed with MEK\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e(Methyl Ethyl Ketone), paint stripper or by mechanical means.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Remove any spills immediately as MEGAPRIME EP90 is very\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003edifficult to remove once cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCLEANING MEGAPRIME EP-90\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e Use hot soapy water or any solvent to clean the surface of the cured MEGAPRIME EP-90.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e(NOTE: Do not let the solvent sit on the surface of the cured MEGAPRIME EP-90 for more than a few minutes)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIMPORTANT\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Please read all instructions carefully before starting the project.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Proper surface preparation is critical for successful application of MEGAPRIME EP-90.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Take care when lifting and carrying. In transit, keep tightly closed in a\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esecure upright position.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Do not dilute with water or solvents.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Do not apply outdoors if rain is anticipated within the expected curing time. Apply when ambient and surface temperatures are 41°F to 95°F.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003ePot life is 60 minutes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Shelf life approx. 3+ years\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Keep cool and protect against freezing.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e Observe local disposal regulations.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCAUTION: When part B is mixed with part A, the mixed primer increasingly heats up. This is normal\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSAFETY PRECAUTIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eContains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFLUIDAR (Aromatic 100)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCAS number: 64742-75-6; 64742-88-7 \u0026amp; 71-43-2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWARNING\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFlammable liquid and vapour. Causes skin irritation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eKeep away from heat\/sparks\/open flames\/hot surfaces – No\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003esmoking. Wear protective gloves\/protective clothing\/eye\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eprotection\/face protection. In case of inadequate ventilation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ewear respiratory protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIF ON SKIN: Wash with plenty of soap and water. IF IN EYES:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRinse with water for several minutes. Remove contact lenses, continue rinsing for several more minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStore in a well-ventilated area. Keep container tightly closed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDispose of contents according to local regulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eVOC: ≤ 80 g\/l\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePART B\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMEGAPRIME EP-90 EPOXY CURATIVE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Epoxy Curative (Part B) must only be used with \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMEGAPRIME EP-90 Universal Epoxy Primer (Part A).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no need to stir Part B.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe entire contents of Part B must be added to Part A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eStir Part A \u0026amp; Part B together well with a flat paddle for at least 2 minutes or more, until the\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003emixture is completely homogenous.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFor detailed Application instructions, please refer to Part A.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSAFETY PRECAUTIONS\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWarning \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHarmful if swallowed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCauses severe skin burns and eye damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMay cause an allergic skin reaction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSuspected of causing genetic defects.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":4875038687267,"title":"Durabak Accelerator (Non-UV Indoor)","handle":"copy-of-durabak-accelerator","description":"\u003cp\u003eDurabak liquid accelerator can be used to reduce the drying\/curing time by up to 50%, depending on the climactic conditions. This may be helpful in areas of low atmospheric moisture, or when shorter curing\/drying times are required. The accelerator comes in pre-measured packets or cans; one for quarts and one for gallons.\u003c\/p\u003e\n\u003cp\u003eQuart: Select this size if you are using quart cans of Durabak.\u003c\/p\u003e\n\u003cp\u003eGallon: Select this size if you are using gallon cans of Durabak.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDIRECTIONS\u003cbr\u003e • Contents of accelerator should be added to the DURABAK™ can upon opening,\u003cbr\u003e at the ratio of one quart-packet or can per quart, or one gallon-packet or can per\u003cbr\u003e gallon.\u003cbr\u003e • The mixture should be stirred thoroughly to assure complete blending, then applied\u003cbr\u003e as per DURABAK™ regular instructions.\u003cbr\u003e • Accelerator will not affect product performance. It only speeds drying and\u003cbr\u003e curing time.\u003c\/p\u003e","published_at":"2021-02-18T11:21:23-05:00","created_at":"2021-02-18T11:18:34-05:00","vendor":"durabak-company","type":"","tags":["calculator","Durabak Automotive","Durabak Marine","Durabak Prep","live","SHOP NOW"],"price":495,"price_min":495,"price_max":695,"available":false,"price_varies":true,"compare_at_price":495,"compare_at_price_min":495,"compare_at_price_max":695,"compare_at_price_varies":true,"variants":[{"id":33040275439651,"title":"Quart \/ Non-UV (Indoor)","option1":"Quart","option2":"Non-UV (Indoor)","option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Durabak Accelerator (Non-UV Indoor) - Quart \/ Non-UV (Indoor)","public_title":"Quart \/ Non-UV (Indoor)","options":["Quart","Non-UV (Indoor)"],"price":495,"weight":454,"compare_at_price":495,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":33040275472419,"title":"Gallon \/ Non-UV (Indoor)","option1":"Gallon","option2":"Non-UV (Indoor)","option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Durabak Accelerator (Non-UV Indoor) - Gallon \/ Non-UV (Indoor)","public_title":"Gallon \/ Non-UV (Indoor)","options":["Gallon","Non-UV (Indoor)"],"price":695,"weight":454,"compare_at_price":695,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.durabakcompany.com\/cdn\/shop\/products\/Durabak_Accelerator_2x_42e0a5b0-3b77-4f4a-9cde-f15855566f71.png?v=1613665352"],"featured_image":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Durabak_Accelerator_2x_42e0a5b0-3b77-4f4a-9cde-f15855566f71.png?v=1613665352","options":["Used With","Use"],"media":[{"alt":null,"id":10012291760163,"position":1,"preview_image":{"aspect_ratio":0.811,"height":1060,"width":860,"src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Durabak_Accelerator_2x_42e0a5b0-3b77-4f4a-9cde-f15855566f71.png?v=1613665352"},"aspect_ratio":0.811,"height":1060,"media_type":"image","src":"\/\/www.durabakcompany.com\/cdn\/shop\/products\/Durabak_Accelerator_2x_42e0a5b0-3b77-4f4a-9cde-f15855566f71.png?v=1613665352","width":860}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDurabak liquid accelerator can be used to reduce the drying\/curing time by up to 50%, depending on the climactic conditions. This may be helpful in areas of low atmospheric moisture, or when shorter curing\/drying times are required. The accelerator comes in pre-measured packets or cans; one for quarts and one for gallons.\u003c\/p\u003e\n\u003cp\u003eQuart: Select this size if you are using quart cans of Durabak.\u003c\/p\u003e\n\u003cp\u003eGallon: Select this size if you are using gallon cans of Durabak.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDIRECTIONS\u003cbr\u003e • Contents of accelerator should be added to the DURABAK™ can upon opening,\u003cbr\u003e at the ratio of one quart-packet or can per quart, or one gallon-packet or can per\u003cbr\u003e gallon.\u003cbr\u003e • The mixture should be stirred thoroughly to assure complete blending, then applied\u003cbr\u003e as per DURABAK™ regular instructions.\u003cbr\u003e • Accelerator will not affect product performance. It only speeds drying and\u003cbr\u003e curing time.\u003c\/p\u003e"}