Durabak Accelerator (Non-UV Indoor)

Durabak liquid accelerator can be used to reduce the drying/curing time by up to 50%, depending on the climactic conditions. This may be helpful in areas of low atmospheric moisture, or when shorter curing/drying times are required. The accelerator comes in pre-measured packets or cans; one for quarts and one for gallons.

Quart: Select this size if you are using quart cans of Durabak.

Gallon: Select this size if you are using gallon cans of Durabak.

DIRECTIONS
• Contents of accelerator should be added to the DURABAK™ can upon opening,
at the ratio of one quart-packet or can per quart, or one gallon-packet or can per
gallon.
• The mixture should be stirred thoroughly to assure complete blending, then applied
as per DURABAK™ regular instructions.
• Accelerator will not affect product performance. It only speeds drying and
curing time.