Your cart
Please Wait

Before You Open the Can: 7 Things Durabak Owners Wish They'd Known

We go through our customer reviews. More than 900 of them average 4.7 stars, and most say the same thing: tough coating, great result. The few that don't almost always describe the same handful of surprises.

Here they are, so you don't have to learn them halfway through your project.

## 1. It starts setting up as soon as the lid comes off
One customer put it plainly: 'Dry extremely fast once opened so work fast. I know now why it comes in quart cans.'

Durabak is a one-part moisture-cure polyurethane. Moisture in the air starts the cure. So:
- Have prep, masking and tools done before you open anything.
- Pour a small working amount into your tray and keep the lid back on the can between pours.
- On bigger jobs, pour out only what you can roll in the next few minutes and reseal the can.

## 2. Thin coats beat thick coats
A customer who got air bubbles called us, and the answer was simple: it went on too thick. If you already have pinholes or bubbles, the fix is a very thin coat of Durabak over them. Two even coats look better and cure better than one heavy coat. If the first coat looks rough, you're probably doing it right. Another owner said: 'When you do the first coat you are going to think man I messed up but trust the process and the second coat does wonders.'

## 3. Heat and humidity change how it works
Owners in hot, humid weather tell us it sets faster and is harder to keep a wet edge. Pick a cooler part of the day, work in smaller sections and keep your working amount small. If you're working in extreme conditions, contact us before you start. Tell us your setup and we'll talk it through. Emails are answered within 1 business day.

## 4. Use the right roller for your finish
- Textured: use the stipple roller sleeve. It's what spreads the rubber granules into an even texture.
- Smooth: use the 3/16 inch short-nap mohair sleeve.

One customer who got the wrong sleeve ended up with a spotty textured finish. Make sure you have a roller frame that fits your sleeve size before project day, so you're not hunting for a handle with an open can.

## 5. Buy all your cans at once, and check them together
If you need more than one can, order them together. Before you start, open and stir each one and compare them side by side. If anything looks off in color or texture, stop and contact us before you roll. It's much easier to fix before it's on the truck.

## 6. Prep is the job
When a coating lets go, prep is almost always why. Clean and degrease, scuff, remove loose rust and old flaking coatings, and let everything dry fully.
- Grit: 80 grit over paint and other sound coatings. 40 grit on bare metal before primer.
- Fiberglass: 40 grit scuff plus a xylene wipe, no primer.
- Old bed liner (Rhino, Line-X, Herculiner, Raptor and similar): scuff with 40 grit. If it's too rough for sandpaper, score the surface with a wire brush.
- Oil-based rust proofer (Fluid Film and similar): remove it completely, then prep like bare metal.
- Primer: only needed on bare metal and wood.
- Test first: Do a small adhesion test patch before you coat the whole job.

For the full steps on your surface, check our step-by-step Application Guidelines. If you're still not sure about yours, ask us first.

## 7. Open the can the right way
One customer told us the lid wouldn't open without pliers, and it got wrecked. Use a proper paint can opener and work around the rim a little at a time. A clean, undamaged lid also seals better between pours.

## Still have a question? Ask before you start
Textured covers about 60 sq ft per gallon in 2 coats. Smooth covers about 75 to 80 sq ft per gallon in 2 coats. Use our coverage calculator to size your order.

Tell us what you're coating, what it's made of and roughly how big it is. We'll tell you the finish, the primer and how much to order. It's the fastest way to a result you'll want to show off.

Shop Durabak 18 Textured · Shop Durabak 18 Smooth

Leave a comment

Please note, comments must be approved before they are published

×