You’ve done the research and come to the realization that Durabak is a great option as a bedliner for your truck. That shows me that you are a wise person. Maybe it’s because you know that any product trusted by the Navy is worthy of your time.
Now the time has come to figure out how much bedliner you need for your truck. The calculations are simple and because I already know how smart you are, this should be easy to explain!
One gallon of Durabak (Textured) is going to cover approximately 60 square feet when you apply two coats. Proper application will give you a surface of about a 1/16th of an inch thick with the textured.
Durabak can be applied by brush, roll or sprayer. If spraying, an undercoating gun, or Schutz spray gun is recommended. You may also need to thin your materials with Xylene at approximately 10%. When spraying any material, you need to account for some overspray, so you may want to figure a little more product.
By now you are wondering exactly how much bedliner you need to get this job done. Here’s how you figure that out.
Do The Measurements
Square footage is typically measured by multiplying the length of the project by the width of the project. For example, if you have a 10-foot length and a 6-foot width, you would end up with a total of 60-square feet.
So, as a general rule of thumb, one gallon should be sufficient for a 6-foot pickup bed. Purchase and additional 1-2 quarts for an 8-foot bed.
Keep in mind that this calculation only provides a rough idea of your total square footage needs. For the best results, you always want to factor in a little extra for waste or surface irregularities. As noted above, if you are spraying the material, you can expect to have some overspray.
Quick Reference to How Much Bedliner You Need
As a quick reference on how much bedliner you need for a truck, here are some quick calculations that might help. Remember, always measure the truck yourself to determine the proper amount needed:
- Ford F-150 – If it’s a Regular Cab Ford F-150 truck with a 6-foot 5-inch bed, you would need roughly 3 gallons to cover the entire truck and bed. Plan to use a little over a gallon for the bed, and the remainder for the truck exterior.
- Toyota Tacoma – On the Toyota Tacoma truck 5-foot bed, you need 3 quarts to cover the bed, and about 2 gallons to cover the truck exterior.
- Honda Ridgeline – This Honda Ridgeline truck bed is generally 5-feet 3-inches. You will need 1 gallon on the bed, although you may have a little leftover to get started on the truck exterior body, which will again require about 2 gallons.
It is always better to have a little extra product on hand than not enough. If you end up with some extra Durabak, there are plenty of other ways to use it so it doesn’t get wasted. Be sure to check out our 10 Excellent Ways to Use Durabak.
To make the most of the Durabak you purchase, here are a few tips to help keep the waste down.
- Durabak is available in gallon or quart containers. This should make it easier to get the amount you need for your truck.
- Apply two coats of Durabak. You can opt to apply more than that; just be sure that you apply them in thin layers.
- If you have extra Durabak after the project is over, there are plenty of uses for it. Remember that Durabak is good for concrete, wood, metal, fiberglass, rubber, plastic, tile and more.
Now that you know how much bedliner you need for your truck, you are ready to get started. Order your Durabak today and protect your truck with this UV-resistant, waterproof and durable coverage. If you have questions about how much to order or the best ways to apply Durabak, feel free to contact us. Our trained staff is available to help you with your bedliner needs.