How to Add Non-Skid Paint to a Ramp

Having a ramp can be an important way for you to have accessibility, but it can also pose some hazards. This is especially true when the ramp gets slippery or wet. During these times, a ramp can be more dangerous than it is beneficial. Thankfully, there are ways to prevent falls on a ramp. Read through this guide on how to add non-skid paint to a ramp and create a safe environment.


Why Add Non-Skid Paint to a Ramp?

There are plenty of options available when it comes to creating a safer ramp surface, why add non-skid paint to a ramp? We’re going to show you that it is the best option available.

Non-Slip Mats are used by many on their ramps but there are several downfalls to this option. First, mats don’t stay put on their own. They can be applied with glue to nails, but they bunch and shift.

Second, they have to be cleaned which can be a pain, especially if debris gets underneath them. Finally, a mat isn’t going to cover the entire ramp. This means that those using it will still need to proceed with caution during wet weather.

Non-Skid Treads are another way people deal with slippery ramps. These pieces of raised metal need to be built onto the entire ramp to be effective. This can be an expensive option that doesn’t appeal to most people.

Finally, we have gotten to why you should add non-skid paint to a ramp. This is a quick solution that only takes a day to dry. Furthermore, it is easy to apply and most anyone can do it. Non-skid paint is going to adhere to any surface and won’t need special care after application.

How to Add Non-Skid Paint to a Ramp

The steps to add non-skid paint to a ramp are simple:

  1. Choose the proper environment for the job – Avoid days that bad weather is possible. Paint during a sunny day when temperatures are between 70 and 80 degrees with the humidity below 65%. If using Durabak, the humidity should be at least 40%, but not too high because it could cure too fast.
  2. Prepare your area – Make sure you tape off all areas that you don’t want to be painted. In addition, you will need a clean and dry surface to paint on.
  3. Follow instructions carefully – Most people will avoid reading directions thinking that they know what to do, but this is an important step. All paint products come with the directions that work best for the specific formula. If you use Durabak for this task, you can feel confident knowing that our products come with application manuals to walk you through the process.
  4. Mix and Apply – When mixing your paint don’t prepare more than you’ll use in a 4-hour time frame. Start with a small roller and get the edges of the ramp first. Then, use a large roller and paint the rest of the ramp. It will most likely require more than one coating.
  5. Allow the paint to dry – Most paints will take 24 to 48 hours to completely dry. Do not attempt to walk on or use the ramp until the paint has dried.


You can create a safe environment by taking the time to add non-skid paint to a ramp. One thing is for sure; doing it yourself saves money and allows you the ability to know the job was done right. Using the highest quality products like Durabak ensures a job well done. Contact us today and we can help you to determine what is best for your needs.

Click here to discover the excellent color and texture options Durabak has to offer.

2 Responses to How to Add Non-Skid Paint to a Ramp

  1. Janet Stewart January 15, 2018 at 2:36 am #

    Can I paint this on the rubber mat that is now on my horse trailer?

  2. BillyBob October 18, 2018 at 4:31 pm #

    We put some on rubber matting we have and it’s amazing! This stuff just lasts and lasts and it’s flexible too!

    I don’t know what type of rubber you have but we tested it like it says here

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.